•  

ZR-10E

Hydrophilic Emulsifier

Designed to remove excess surface penetrant, ZR-10E minimizes surface background during Method D fluorescent penetrant testing while protecting indication integrity in critical component inspections. ZR-10E provides long tank life and excellent solution consistency for dependable, long-lasting performance in a variety of applications.

This Method D remover reduces fluorescent background on rough surfaces and minimizes penetrant bleed-out from hollow parts.

ZR-10E is tested and approved to AMS 2644 to work with Magnaflux PE penetrants ZL-2C Level 2ZL-27A Level 3 and ZL-37 Level 4 for verified penetrant system reliability.

ZR-10E is listed on the QPL SAE AMS 2644 Qualified Product List and is approved for use by Pratt & Whitney.

Benefits

Maximize penetrant inspection process control

  • PE penetrant system is less susceptible to human error since ZR-10E only works with rinse water to remove excess surface penetrant
  • Tested and confirmed per AMS 2644 to work with Magnaflux PE penetrants for verified penetrant system reliability
  • Maintains solution consistency for dependable performance with minimal agitation

Wide range of inspections

  • Flexible to work with many types of equipment and application methods
  • Inspect a wide range of high-value components without fear of corrosion or specification non-conformance
  • Meets all major industry and NDT specification requirements, including Aerospace Prime and OEM specs, AMS 2644 and ISO 3452

Features

  • Hydrophilic emulsifier
  • Reduces bleed-out on hollow parts
  • Lower concentration required
  • Resist degradation from bacteria, fungus or other contaminants
  • QPL SAE AMS 2644 Qualified Product List
  • Approved for use by Pratt & Whitney

Ordering Information

5 gal / 18.9 L01-3625-40

20 gal / 75.7 L drum01-3625-30

55 gal / 208 L drum01-3625-45

Product Properties

NDT TypeFluorescent Penetrant Testing, Visible Penetrant Testing

Penetrant TypeType 1, Type 2

Applications

Ideal ApplicationCastings, Detecting fine to very-fine discontinuities, High-stress parts, Investment castings, Precision components, Safety-critical components, Turbine engine blades, disks, etc.

Defect ExamplesCracks, Porosity, Scratches, Seams

Compliance

StandardsAECL, AMS 2644, AMS 2647, ASME BPVC, ASTM E1417, ASTM E165, Boeing BAC 5423 PSD 6-46 or 8-4, Boeing PS-21202, GE P3TF2, GE P50YP107, Honeywell EMS 52309, Pratt & Whitney 4355

Resources

Related Products

  • ZP-4B

    ZP-4B

    Dry powder developer for Form a penetrant testing, QPL SAE AMS 2644 and Pratt & Whitney approved

  • ZP-5B

    ZP-5B

    Water suspendible developer for Form c penetrant testing, QPL SAE AMS 2644

  • ZP-9F

    ZP-9F

    Solvent-based developer for Type 1 Form d or Type 2 Form e penetrant testing, QPL SAE AMS 2644

  • SKC-S

    SKC-S

    NDT cleaner and remover for pre-cleaning before non-destructive testing and for removing excess surface penetrant

  • ST700

    ST700

    Inspection-grade stationary flood LED UV-A lamp gives overhead black light for fluorescent NDT inspections

  • EV6000

    EV6000

    Portable, handheld LED UV lamp for black light inspection during fluorescent PT or MT testing

Subscribe to Magnaflux News:

Magnaflux

155 Harlem Avenue
Glenview, IL 60025, USA
Telephone: +1 847-657-5300
Fax: +1 847-657-5388
Contact Magnaflux Customer Service

Select Your Country North America Mexico Brazil China Europe Russia India New Zealand, Australia, Japan, Southeast Asia
© 2018 Magnaflux - all rights reserved.
top

We have placed cookies on your computer to give you the best possible experience with our website. These cookies are also used to ensure we show you advertising that is relevant to you. If you continue without changing your settings, you are agreeing to our use of cookies to improve your user experience. You can click the cookie settings link on our website to change your cookie settings at any time.