Specifications for MT-2100 Color Gage
Size: 5" (127 mm) (L) x 3" (76.2 mm) (W) x 1.25" (31.75 mm) (H)
Weight: 8 oz (.23 kg)
Thickness range: 0.025-20 inches (.06 mm-508 mm), depending on material, temperature and transducer selection
Material Velocity Calibration Range: 0.0200-0.7362 in/uS (0.508-18.699 mm/uS)
Temperature: Gage Operating: -4º F to 122º F (-20º C to 50º C)
Surface temperature of material: Depending on probe use, from -5º F to 1000º F (-20º C to 537º C)
Battery life: Up to 200 hours (40 Hours with backlight on)
Battery type: 2 "AA" Alkaline
Color Display: 170 × 220 pixels. high resolution TFT color display
Information displays: min, max, large reading while displaying min at the same time, velocity, zero, calibration, units, freeze, unfreeze, % battery life remaining, gain - low, std, high, LOS (loss of signal), echo to echo symbol
Resolution: .001" (.01 mm), .01" (.1mm)
Auto Probe Setup Parameters: Via pick list from a menu to set up gain, v-path and sensitivity
Delay line zero measurement: Auto at power up with listed numeric value. Ideal for correcting delay line wear/curvature and for transducer acoustic drift at elevated temperatures
Package: Custom, splash-proof, high impact plastic with illuminating rubber keypad for go/no-go testing
Bandwidth: 0.5-20 MHz (-3dB)
Units: English/Metric/Microseconds
Gain: Low, Standard and High for varying test conditions
Measurement rate: 4 or 20 measurements per second
Differential Mode: Displays the difference from the actual thickness measurement and a user entered reference value
Alarms: Minimum/Maximum depth, vibralarm, beeps and display flashes as well as keypad illumination
Illuminating keypad: F1 = Red, F2 = Yellow and F3 = Green for easy, go/no-go testing
Automatic probe wear indicator: Automatically informs the operator to replace the transducer (Patent Pending)
Ergonomics: User selectable lefty or rightly display changes via keypad (Patent Pending)
Backlight: Light Emitting Diode (LED), On/Off or Auto On based on valid readings or last key press
Shut off: Auto, timeout (User programmable from 5-31 minutes or never shut off)
Fast Scan Min/Max mode: Displays minimum or maximum thickness value at 20 measurements per second (ideal for high temperature thickness readings and tracking the minimum depth alarm) while also displaying actual thickness
Protective Pouch: Custom molded pouch with belt clip and wrist strap for either lefty or righty operators (Optional)
Carrying Case: Hard plastic with high density molded cut out for all accessories
Freeze mode: Freezes display to hold onto last reading (ideal for high temperature applications)
Hold mode: Holds display to retain last thickness reading in reverse video display
Standard MT-2100 includes: Ultrasonic thickness gage, DK-537 potted, 5 MHz 0.375 inch diameter, operational manual, cable, couplant
Warranty: Limited 2 year warranty on parts and labor