P-SERIES
Portable Power Packs are convenient and economical inspection units that are used in a wide range of magnetic particle applications that require only moderate power.
The Magnaflux Portable Power Packs are ideal for large or heavy parts, in-service mobile equipment, or job-site welds.
Features:
- Find surface defects with AC current; switch cable connection to halfwave DC (HWDC) for near-surface flaws
- Locate defects in any direction using prods, central conductor, coil (wrap part with 3-5 turns of cable)
- Infinitely variable current control
- Demagnetize your parts in AC mode by slowly turning the current dial to zero
- Built-in automatic-reset circuit breaker
- May be used as the main power source for the Magnaflux MAG Kit modular bench inspection systems
| |
P-70 Power Pack
P/N 190575 – 115v OR P/N 190575-1 - 230v
|
P-1500 Power Pack
P/N 198500 (Must specify 230v/460v)
|
| Length |
17 1/2" (44.5 cm) |
22" (55.8 cm) |
| Width |
9" (23 cm) |
9 1/2" (24.3 cm) |
| Height |
7 1/2" (19.1cm) |
9 1/2" (24.3 cm) |
| Maximum Output* |
750 amps, AC or HWDC |
1500 amps, AC or HWDC |
| Current Input Single Phase |
115 VAC, 50/60 hz; 230 VAC, 50/60 hz; (other voltages available) |
230/460 VAC, 50/60 hz 460 VAC, 50/60 hz (other voltages available) |
| Line Current |
26 amps @ 115 VAC; 13 amps @ 230 VAC |
42 amps @ 230 VAC; 21 amps @ 460 VAC |
| Maximum Duty Cycle |
2 minutes ON, 2 minutes OFF |
2 minutes ON, 2 minutes OFF |
| Unit Weight |
35 lbs (15.9 kg) |
93 lbs (42.2 kg) |
*Current ratings are based on the use of two 15-foot length of 4/O Cable